VIEW® Pro Encoder E110- 4K

Key Highlights

Uses H.264/H.265 compression for low bandwidth consumption without sacrificing quality
Accepts unlimited source inputs from any location on an existing IP network, with support for 4K resolution and 60 fps input
Supports screen rotation and text overlay
Comes with a software license for video composition and video wall management, including video windowing, WYSIWYG layout management

+ High profile H.264 lossless compression

+ H.265 High Efficiency Video Coding compression

+ 4K resolution with 60 FPS input

+ Compatible with 1080p resolution screens

+ 24-bit true color with 4:4:4 color space

+ Low latency - end to end

+ Full HDCP support

+ Any number of inputs & outputs in any combination

+ One source to many displays

+ Many sources to one display

+ Many sources to many displays

+ VIEW Virtual Matrix control application

+ Matrix view of all live sources & destinations

+ In-room controller - touch panel & web

+ 3rd-party control - AMX, Crestron, Utelogy

+ Existing IP network infrastructure

+ Uses standard CAT 5e/6 cabling

+ Interoperates with 3rd-party systems

+ RTSP/UDP streaming

+ Backward compatible with 1080p VIEW Pro products

+ Software license (one time, per unit)

+ Video-wall, Video-windowing, video-composition

+ Layout management

+ Text overlay, screen rotation

+ Auto-discovery of encoders & decoders

+ Device configuration & management

+ Project management

+ System monitoring & troubleshooting

Digital Video Connection: X1 HDMI 2.0a input
Supported Resolutions:
- 4K60 DCI (Digital Cinema Initiatives) 4096×2160, 60 FPS
- 4K60 UHDTV (Ultra High Definition TV) 3840×2160, 60 FPS
- 1080p60 1920×1080
- WUXGA 1920×1200 (scaled resolution)
- HD720 1280×720
- UXGA 1600×1200
- WSXGA+ 1680×1050
- SXGA+ 1440×1080 & 1440×1050
- WXGA 1440×900
- SXGA 1280×1024
- XGA 1024×768
- SVGA 800×600
- VGA 640×480
- X1 via HDMI input port
Compression Standard:
- H.265 HEVC
- H.264/MPEG4 Part 10 (AVC)
- Baseline, Main, High profiles up to 4.2
COLOR SPACE
- Support: 24-bit
- RGB 4:4:4
- YCbCr 4:2:0
HDCP 2.1 Support
- X1
Scaling Support

2 CH AUDIO ENCODING:
- LPCM (Uncompressed) MPEG4 AAC-LC
- Sample Rate: (KHz); 11, 22, 24, 32, 44.1, 48, 96, 128,192
- Bit Rates: (Kbps); 32, 96, 128,192, 320
2 CH UNBALANCED ANALOG AUDIO INPUT:
- THD+N = .006% @20dBu
- Dynamic Range: 106dB
- Frequency Response: +/- 0.5dB (20->20KHz)
Crosstalk: -80dB
- Removable Phoenix 3.55mm (3 pos × 2)
2 CH UNBALANCED ANALOG AUDIO INPUT:
- THD+N = -84dB, Dynamic Range = 90dBA
- SNR = 95dBA
- Crosstalk = -80dB, 3.5mm phone jack (T/S/R 3 pos.)
DIGITAL AUDIO I/O:
- X1 input via HDMI ports
USB AUDIO:
- X1 input (future upgrade)

Power: 19VDC / @2A Normal Operation / @6A Max
Rear Panel Power Button: Short press safe power cycle / long press forced shut down
Power LED Color Status:
State | LED Color
Normal | Blue
Boot | Green
Error | Red
Upgrade | Amber

10/100/1000 RJ45: X2 Gigabit ports
Video Streams (Channels): Up to 4K@60Hz OR 4096 × 2160 @ 60 Hz
Audio Streams (Channels):
- Stereo or multi-ch pass through
- Configured as 3 outputs of 2 Stereo analog,
- or 1 Stereo or multi-ch digital
StreamNet Discovery & Control: Requires StreamNet Firmware 3.1x or higher

Serial RS232 Port: DB9
IR Output: 3.5mm phone jack (T/R 3 pos.) (Compatible with StreamNet and other IR Emitters)
IR Input: 3.5mm phone jack (T/S/R 3 pos.) (Compatible with StreamNet IR Sensor only)
USB 3.0, 2.0: Future support
GPIO Inputs:
- X3, removable Phoenix 3.55mm (6 pos × 1)
- Contact Closure sensor input
GPIO Outputs:
- X3, removable Phoenix 3.55mm (6 pos × 1) Latching Relay Contact Closure output 20V@1A Max VIEW ® Pro Encoder E110-4K PRODUCT SPECIFICATIONS Left/Right Balanced Outputs COM2 Port for Display/3rd Party Device Control COM1 Port for Display