Converge® Pro 2 128SR Audio DSP Platform
An ideal DSP mixer for sound reinforcement applications
Converge® Pro 2 128SR Audio DSP Platform
An ideal DSP mixer for sound reinforcement applications
Key Highlights
- Acoustic Intelligence for rich audio
- DARE® feedback elimination
- Advanced microphone gating
- 12 mic/line-inputs and 8-line outputs
- USB audio support
- Stack up units to 144 Mic/line inputs
- Daisy-chain with all ClearOne P-link devices such USB expander and GPIO expander
- Daisy-chain with Dialog 20 Wireless Microphone System
- New CONSOLE® software for discovery, configuration and control
- Third-party control modules
- Two power options- P-Link and POE
Applications
- Sound reinforcement
- Dante audio networking
Environments
- Convention centers
- Transportation hubs
- House of Worship
- Training rooms
- Lecture halls
- Auditoriums
- Courtrooms
MIC/LINE INPUTS & OUTPUTS
- Inputs: Balanced audio inputs, 3.81mm Orange color Phoenix/Euroblock type male header, Push-on mini-terminal block
- Outputs: Balanced audio outputs, 3.81mm Black color Phoenix/Euroblock type male header, Push-on mini-terminal block
- Frequency Response: 20Hz – 22kHz @ +4dBu, +/- 0.5dBu
- EIN (Equivalent Input Noise): 20kHz BW, max gain, Rs = 150Ω, -126dBu
- THD + N (Total Harmonic Distortion + Noise):
- 20Hz – 22kHz @ +4dBu, line level, 0.006%
- 20Hz – 22kHz @ -56dBu, mic level, <0.04% - Dynamic Range: 20Hz – 20kHz @ 0dB, >105dB
- Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB
- Input Impedance: Balanced (line to ground), 2.2kΩ, 1%
- Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
- Maximum Input Level: -65dBu to 20dBu
- Phantom Power: 48V, Impedance 6.81kΩ
- Output Impedance: Balanced (line to ground), 95Ω, 1%
- Output Level: 0dBu (Nominal), 20dBu (Max), -40dBu (Selectable)
ETHERNET
- Port Type: RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
- IP address: IPv4 (IPv6 upgradeable through future s/w, f/w upgrade)
C-LINK EXPANSION BUS
- Ports Type: RJ-45 (Cat5e or Cat6)
- C-Link In & Out: Proprietary Expansion Bus
- Audio: 64 Expansion channels
- Cable: Solid core, factory terminated Cat 5e or 6 cable
- Distance: Up to 150’ (45M)
P-LINK PERIPHERAL BUS
- Ports Type: RJ-45 (Cat5e or Cat6)
- P-Link In & Out: Proprietary Peripheral Bus
- PoE In:
- P-Link In Port
- PoE 802.3af Mode B, Midspan
- Power on “spare pairs” 4,5 and 7,8
- Input voltage range: 48V to 56V - Audio: Up to 3 DIALOG 20 Wireless Receiver units + Up to 3 USB Expander units + Up to 3 GPIO Expander units
- Cable: Solid core, factory terminated Cat 5e or 6 cable
- Distance: Up to 200’ (60M)
RS232
- Port Type: DB9 Female
- Settings: 9600/19200/38400/57600/115200 Baud; Serial Echo; Flow Control
- Support: Serial commands
GPIO
- Port Type: 5.08mm Green color Phoenix/Euroblock type male header
- Support: Control, Status, Variable Voltage Control
- Power Pin: 5V DC @ 350mA Power Source
- Pin 1 to 4:
- Open Collector Outputs: 40VDC @ 250mA
- Active Outputs (Source/Sink): 5VDC @25mA
- Logic Inputs: 40.2kΩ pull up
- Variable Voltage Control Inputs: 5VDC max - Ground Pin: GND
USB CONTROL
- Port Type: USB-B connector
- Location: Front Panel
- Compatible: USB 2.0 & USB 3.0
LEDs
- Location: Front Panel
- Status LED
- Off: Unit still initializing
- Blue - Fast Blinking: Stack Syncing in progress
- Blue - Slow Blinking: Unit not configured
- Blue - Solid: Configured unit
- Red - Fast Blinking: Stack Sync error - Locate LED: Blue - Blinking: Unit “Locate” command received
- Power LED: Blue - Solid: Unit is powered on
TOUCH SENSOR
- Sensor Type: Capacitive Touch Button
- Location: Front Panel
POWER & THERMAL
- Port Type: AC Inlet
- Mains Voltage: 100-240V AC, 50/60Hz
- Power Consumption: 50 Watts Typical
- Thermal: 170 BTU/Hr Typical
- Operating Temperature: 14°F (-10°C) to 104°F (40°C) Ambient Temperature
DIMENSION & WEIGHT
- RU size: 1 RU
- Width x Depth x Height:
- Without rack-ears: 17”W x 10.73”D x 1.72”H (43.2cmW x 27.3cmD x 4.4cmH)
- With rack-ears: 19”W x 10.73”D x 1.72”H (48.3cmW x 27.3cmD x 4.4cmH) - Unit Weight: 9.3 lbs (4.2 kg) (Approximately)
- Shipping Weight: 13.8 lbs (6.3 kg) (Approximately)
PACKAGE
- Power Cord: 6’ (1.8M), Grounded, Qty 1
- Input Connectors: Terminal Block Connector, 3 Position (Orange), Qty 12
- Output Connectors: Terminal Block Connector, 3 Position (Black), Qty 8
- GPIO Connector: Terminal Block Connector, 6 Position (Green), Qty 1
- C-Link Cable: RJ-45 To RJ-45 Cable, 18” (45.7cm), Qty 1
- USB Cable: USB Type A to Type B, 6’ (1.8M), Qty 1
- Rack Ears: Pre-installed, Qty 2
- Screw/Washer Kit: Rack Decor, Qty 4
PART NUMBER
- 910-3200-101 : CONVERGE Pro 2 128SR
