CONVERGE™ PA 460 Amplifier
A powerful and compact high-efficiency Class-D audio power amplifier
CONVERGE™ PA 460 Amplifier
A powerful and compact high-efficiency Class-D audio power amplifier
CONVERGE PA 460 is optimized to work with ClearOne’s DSP mixers, and it also works with any third-party mixer.
Key Highlights
- 4 channels x 60 Watts in normal mode
- 2 channels x 120 Watts in bridged mode.
- 4/8 Ω speaker output.
- 70V/100V constant voltage output
- Efficient power consumption with auto-standby mode.
- Compact, half-rack sized form factor.
- Fanless
- Software-free plug-and-play for easy installation
Applications
- Conferencing
- Sound reinforcement
- Streamed audio
- Presentation audio
- Background music
- Sound masking
- Zone amplification
Workspaces
- Conference rooms
- Lecture halls
- Courtrooms
- Auditoriums
- Restaurants
- Museums
- Telemedicine theatres
CONVERGE PA 460 is optimized to work with ClearOne’s DSP mixers, and it also works with any third-party mixer.
Inputs & Outputs
- Inputs: 4 Channel, Balanced audio input, 3.81mm Green Phoenix/Euroblock type male header, Push-on mini-terminal block
- Outputs: 4 Channel, Balanced audio output, 5.08mm Black Phoenix/Euroblock type male header, Push-on mini-terminal block
- Input Sensitivity: 20Hz – 22kHz @ 0dBu
- Output Modes: 4/8W and 70.7V/100V
- Max Rated Output: 4 x 60W @ sensitivity, in 4/8Ω & 70.7V/100V modes
- Max Rated Output, Bridged: 2 x 120W @ sensitivity, in 4/8Ω mode
- Max Rated Output, Bridged: 2 x 120W @ sensitivity, in 70.7V/100V mode
- Frequency Response: 20Hz - 22KHz (+/- 1dB)
- THD+N: 20Hz – 22kHz @ rated power, 4/8W, <0.08%
- Dynamic Range: 20Hz – 20kHz @ 0dB, >100dB, 8W, unweighted
Control
- Slide Switches: Single End, Bridged mode 70.7V mode 100V mode HPF mode @ 80Hz
- Potentiometer Adjustable: 0 to max @ rated power
Front Panel LED Indicators
- POWER: Power status indicator Blue light indicates power on
- CLIP: Clip status indicator Red light indicates clip status due to:
- Input is too high, signal clip
- Output peak detected - SIGNAL PRESENT: Signal indicator Blue light indicates signal is present or passing out
- STANDBY: Standby mode status indicator Yellow light indicates Standby mode enables when no audio is present. The amplifier first enters Mute mode at 2 minutes, then into Standby mode at 10 minutes.
- LIMIT: Limit indicator Red light indicates gain reduction activation
- PROTECT/DISABLE: Protection or Disable status indicators Red light indicates Disabled/Mute/Protection mode Mute mode enables when no audio is present for 2 minutes Protection mode enables when a temperature exceeds 185°F (85°C)
Power & Thermal
- Power Consumption: 42W Typical, Pink Noise @ 0 dBu, 8Ω
- Power Supply: AC input 100-240VAC, 50Hz/60Hz
- Thermal: 143 BTU/Hr Typical
- Temperature: 14°F to 104°F (-10°C to 40°C) (Ambient temperature)
Dimensions & Weight
- Dimensions: 8.38” (213mm) W x 11.06” (281mm) D x 1.72” (44mm) H
- Weight: 2.8 lbs (1.27 kg)
Mounting
- Size: 1 RU for up to two units
