- Supports 2x2 channels of bidirectional audio, allowing PCs and mobile devices to playout and capture audio with Dante-enabled devices over a standard IP network.
- Power with the USB port on a computer or with a PoE (Power over Ethernet) switch—a separate power supply is not needed.
- Automatically discover and natively configure using Audinate® Dante® Controller software.
- Delivers bit-perfect audio reproduction, super-low latency, and sample-accurate synchronization across the entire Dante network.
- Built-in support for Dante Audio over IP and AES67 RTP transport formats.
- Works seamlessly with Dante-enabled devices including ClearOne DSP mixers, Wireless Microphones, and Beamforming Microphones.
- Includes cables to connect to a USB C host port and a USB Type A host port.
- Dante Domain Manager ready.
- Connect to either a USB C or USB A port on any computer using the included cables.
PART NUMBER
- 910-3200-309
CONNECTORS
- USB C: USB 2.0 Device, Driverless 2x2 USB Audio
- RJ-45 Jack: Dante network port, PoE
POWER
- Power Input: USB 5 V or 802.3af PoE
- Power Consumption: 9 Watts (Max)
DANTE
- Sample Rate: 48 KHz
- Bit Depth: 24 Bits/Sample
- Channels: 2 Transmit X 2 Receive
INCLUDED USB CABLES
- USB C to USB Type A: 20 cm (8 in) long
- USB C to USB C: 20 cm (8 in) long
PHYSICAL
- Dimension(W*H*D): 115 x 34 x 28 mm (4.5 x 1.3 x 1.1 in)
- Net Weight: 0.7 Kg (0.15 lbs)
- Operating Temperature: -5 to +55 °C
- Storage Temperature: -25 to +70 °C
COMPATIBLE WITH
